Every technique piece on this site follows the same order, and that order is the point. A reader should be able to see what the job asks for before committing an afternoon to it, and should know where a shortcut stops being a shortcut.
A guide opens with the tools the work actually requires, not a wish list. If a hand-plane sequence needs a jack plane, a straightedge and a winding stick, those are the three items named, and the text says plainly what each one is doing. Anything optional is marked as optional.
Checks come next, because they are what separates a method from a guess. Before the work starts: is the board flat on one face, is the grain running the way you think, is the floorboard loose against a joist or against its neighbour. During the work the same checks repeat at each stage, so a problem shows up while it is still cheap to correct.
Every guide ends with a stopping point: the moment where a faster route would change the result. Sanding past a certain grit before the first coat, driving a fastener blind into a floor with pipes beneath, or skipping the burr removal on a waterstone all sit on that line. We say where it is rather than leaving it to be discovered later.
Hand-plane flattening, sandpaper grit selection, drill specification reading, floorboard repair and chisel sharpening are treated here as documented technique. A trick that works once under specific conditions is labelled as a trick. It does not get folded into the repeatable routine, and it does not get presented as the standard way to work.
Where a guide uses an example, it is written as an example: a rough sawn plank, an older timber floor, a painted interior door. These are situations the method applies to, not case histories, not client projects and not measured outcomes. We do not claim a physical workshop, a visiting service or results we have not documented.
The editorial team works from Friedrichstraße 68, 10117 Berlin, Germany. Questions about a method, a correction to a step or a suggestion for a topic belong on the contact page, which is the direct route to the people who write and check this material. If you want the wider picture of what the magazine covers, the what we do page sets it out, and the workflow page shows how a piece moves from draft to publication.
A guide only stays useful if readers push back on it. If a step in a technique piece does not match what you see at the bench, if a tool description leaves out a limit that matters, or if you want a specific check explained more closely, write it down and send it. Corrections about grit sequences, plane setup, drill specifications and floorboard repairs are the ones we read first, because those are the places where a small error changes the result.
Use the contact page to reach the editorial team. Tell us which article you mean, what you were working on, and where the description stopped matching the work. A short note with the tool, the material and the point of doubt is more useful than a long general comment. The address Friedrichstraße 68, 10117 Berlin, Germany belongs to the editorial team and is listed there alongside the email and phone details.
Please do not send personal project photos or anything you would not want stored. The message field is for text, and the topic selector keeps renovation, woodworking, tools, painting and repairs apart so a note lands with the right editor.
The photographs on this page illustrate the working situations our guides describe: a plane on a rough board, a sanding block on a door panel, a drill laid out with its bits. They are stand-ins for the subject, not records of a specific job. No image here documents a finished project, a customer's house or a result we measured. When a guide says "check the edge with a square", the picture shows the tool and the material, and the check itself stays in the text where it belongs.
That distinction matters on a page about method. A photograph can show you what a sharpening stone looks like when it is wet, or how a floorboard sits against a joist, but it cannot tell you whether the bevel angle is right or whether the screw missed the pipe. Those answers come from the written steps, the checks and the stopping point. Treat the images as orientation before you pick up a tool, and treat the instructions as the part you follow.
If a picture and a written step ever seem to disagree, follow the written step and send a correction through the contact page. Our address is Friedrichstraße 68, 10117 Berlin, Germany.
Every article follows the same editorial order, and that order is the reason the steps hold up when you are standing in front of the actual door, board or floor.
If you want the wider picture of how the magazine is put together, the company page covers it. Questions and corrections go through the support page.
This site stores your answer in your browser's local storage so the notice stays closed on later visits. Accepting or declining only records that choice and does not affect the contact form. You can clear it any time in your browser settings.